Kato, A., Schreuder, G.F., Calhoun, D., Schiess, P., and Stuetzle, W. (2007). Digital surface model of tree canopy structure from Lidar data through implicit surface reconstruction. Proceedings of ASPRS 2007 Annual Conference, May 7-11, 2007. Tampa, Florida ♦
Kato, A. and P. Schiess (2007). LIDAR-derived Tree for Optimal Cable Logging System Design. Proceedings, International Mountain Logging and 13th Pacific Northwest Skyline Symposium, April, 2007. Oregon State University, Corvallis, OR
Kato, A., Calhoun, D., Schreuder, G. F., and Schiess, P. (2006). “Estimating Crown Volume through Implicit Surface Reconstruction from LIDAR Points for Forest Fire Simulation”, Proceedings of MAPPS/ASPRS 2006 Fall Conference, San Antonio, TX.
Schiess, P and A. Mouton, 2005. The Utility of Improved Digital Elevation Models (LiDAR) and Existing Culvert Inventories for Mapping Stream Extent. Techn. Report, University of Washington, Seattle, WA
Schiess, P., 2005. The application of spatially explicit digital elevation and canopy surface data for harvest planning: Moving from coarse digital elevation models and stand averages to detailed ground and canopy surface models in the design of forest transportation systems. Proceedings, FORMEC 2005, Innovationen in der Forsttechnik durch wissenschaftliche Kooperation. University of Ljubljana, Ljubljana, SLO, 26-29 Sept. 2005.
Schiess, P and A. Mouton, 2005. North Fork Mineral Creek Access and Transportation Strategy. Techn. Report, University of Washington, Seattle, WA
Schiess P., F. Krogstad and
F. Damian, 2004. Locating ditch relief
culverts to reduce sediment deliveries to streams – an interactive design
tool. Proceedings, Joint Conference of
IUFRO 3.06 Forest Operations in Mountainous Conditions and the 12th
F. Krogstad and P. Schiess,
2004. The Allure and Pitfalls of Using
LIDAR Topography in Harvest and Road Design. Proceedings,
Joint Conference of IUFRO 3.06 Forest Operations in Mountainous Conditions and
the 12th
Schiess,
P. and
F. Krogstad, 2004.
Schiess, P and F. Krogstad, 2003. LIDAR-Based Topographic Maps Improve Agreement Between
Office-Designed and Field-Verified Road Locations. Proceedings of the 26th Annual Meeting of
the Council on Forest Engineering,, Bar Harbor, Maine, USA, 7-10 September,
2003
Schiess,
P and J. Tryall, 2003. Developing
a Road System Strategy for the Tahoma State Forest
Schiess, P and J. Tryall, 2002. Transportation & Road Management Requirements to Facilitate
Habitat Restoration in the Tyee South Planning Area. Techn. Report,
Schiess, P. and F. Krogstad. 2001. 2001 – A forest engineering odyssey. Proceedings.
. International Mountain Logging and eleventh Pacific Northwest Skyline
Symposium, Dec. 2001.
Schiess, P.
2001. Road management strategies to reduce habitat impacts - a case for
engineered cable yarding operations and harvest schedules. Proceedings, FAO/ECE/ILO Committee on Forest Technology, Management and Training,
and International Union of
Schiess, P and A. Arntzen, 2001. Assessment of Operational Feasibilities for Implementing the
OESF Conservation Strategy. Techn.
Report,
Krogstad, F. and P. Schiess,
2000, Cumulative impact
estimation for landscape scale forest planning. IN: Proceedings of the Annual Meeting of the
American Water Resources Association,
Krogstad, F. and P. Schiess,
2000, Haul routing: an
overlooked factor in environmentally driven road decommissioning, in
Technologies for New Millennium Forestry: Proceedings of the 23rd Annual
Meeting of the Council on Forest Engineering, Kelowna, British Columbia,
Canada, September 11-14, 2000.
Krogstad,
F. and P. Schiess, 2000, Cumulative impact estimation for landscape scale forest
planning. IN: 4th International
Conference on Integrating GIS and Environmental Modeling (GIS/EM4): Problems, Prospects and Research Needs.
Schiess,
P. and
F. Krogstad, 2000. Sediment and
road density reduction. IN: (J.
Agee, ed.), Proceedings,
Schiess,
P and L. W. Rogers, 2000. A thinning and access strategy for accelerated stand habitat
creation-Burnt Mountain. Techn. Report,
Schiess,
P. 1999.
A watershed and transportation plan for the North Hoodsport
Planning area. Techn. Report,
Schiess,
P. and W. Jaross, 1999. Comparing long-span vs. conventional skyline design options:
Economics, and silvicultural options.
IN: (J. Sessions, ed.), Proceedings, International Mountain Logging and
tenth Pacific Northwest Skyline Symposium, April, 1999.
Krogstad,
F., L W. Rogers and P. Schiess. 1999. Comparing environmental impacts of long-reach vs. conventional
skyline design options. IN: (J.
Sessions, ed.), Proceedings, International Mountain Logging and tenthPacific
Northwest Skyline Symposium, April. 1999.
Schiess,
P. and
F. Krogstad, 1998. Harvesting logistics: From woods to markets;
Proceedings of the 20th annual meeting of the Council on Forest Engineering.,
Schiess,
P. 1998.
A management plan for the Washougal landscape. Techn. Report,
Schiess,
P. 1997.
A harvest and transportation plan for the south Fork of the
Toutle. Techn. Report,
Berg,
D. R. and P. Schiess.
1996. Setting design evaluation
incorporating
Berg, D. R. and P. Schiess. 1996. Alternative Silvicultural Harvest System Planning:
Stand level setting design incorporating
biological legacies in Clayoquot Sound. . Clayoquot
Symposium on alternative silvicultural systems . McMillan-Bloedel, INTERFOR and B.C. Ministry
of Forests, Tofino, B.C.,
Schiess,
P. and L. O'Brien. 1995. The application of Geographic Information Systems to
forest operations: the integration of cable setting design into GIS.
IN: Proceedings, 2nd Brazilian Symposium on Timber Harvesting and Forest
Transportation;
Clayoquot Sound Scientific Panel (CSSP). 1995. Chapt. 4, Harvest Systems. IN: (Cortex Consultants ,
eds) Sustainable Ecosystem Management in Clayoquot Sound: Planning and
Practice. Cortex Consultants, Victoria, B.C.
Berg,
R. and P. Schiess. 1994. A procedure for estimating logging costs
associated with structural retention; a market analysis. IN Advanced Technology in Forest Operations;
Proceedings of 17th annual meeting of the Council on Forest Engineering. J.
Sessions and L. Kellogg eds.,
Schiess,P.
and J.L. Fridley. 1993. Computer-aided timber
harvest planning and transportation system design, a capstone design course.
In: Innovations in Engineering Design Education. A resource guide for the ASME
Design Education Conference. Book # I00341
Schiess,
P., and J. J. Sessions. 1992. Planning and implementing future forest
operations. Proceedings. International
Mountain Logging and eight Pacific Northwest Skyline Symposium, Dec. 1992.
Cullen,
J. and P. Schiess. 1992.
Integrated computer aided timber harvest planning system. IN: (Schiess, P. and J. Sessions, ed.)
Proceedings. International Mountain Logging and eight Pacific Northwest Skyline
Symposium, Dec. 1992.
Zhen,
S. and
P. Schiess. 1992.
A new approach to truck simulation and road design. . IN: (Schiess, P. and j. Sessions, ed.)
Proceedings. International Mountain Logging and eight Pacific Northwest Skyline
Symposium, Dec. 1992.
FAO.
1989. Road design and construction in sensitive watersheds. Conservation Guide
13/5.
Schiess,
P., J. Cullen and S. Brown. 1988.
Long-term timber sales planning. .
IN: (J. Sessions, ed.), Proceedings, International Mountain Logging and
seventh Pacific Northwest Skyline Symposium, Dec. 1988.
McFadden,
G. and P. Schiess. 1988. Spray distribution pattern from a prototype sludge
application vehicle under varying stand conditions. J. Forest Ecology &
Management. Elsevier,
Schiess,
P. and D. Schuh. 1986. Simulating the effects of boom design and
slope on the productivity of swing-boom feller-bunchers in clearcuts. Technical
Report, PNW-83-214.
McFadden,
G., K. Yonaka and P. Schiess. 1986. Spray tests conducted to determine the
pattern of sludge application under varying stand conditions with the Ag-Chem
gator, Model 2004. Techn. Report.
Schiess, P. and D. Rexroth. 1986. Development of a harvest machine simulation
program in a universal, high-level computer language. Technical Report, PNW-83-215.
Schiess, P. and B. Carson.
1985. An evaluation of cable
yarding felled and bunched trees on steep slopes. Final Report, PNW-83-213.
Schiess, P. and D. Schuh.
1985. Steep slope harvesting: the
Kaiser spyder feller-buncher. IN:
Proceedings, Improving Mountain Logging Planning, Techniques and Hardware.
Schiess, P., B. Carson and C. Mann. 1985.
An evaluation of cable yarding bunched trees on steep slopes. IN:
Proceedings Council of Forest Engineering, 8th annual meeting. August, 1985,
Mann, C., P.
Schiess and E. S. Miyata. 1985. Increasing productivity of timber harvesting
on steep slopes. Paper No. 85-1592. Amer. Soc. Agric. Eng. Dec. 1985,
Schiess, P., D. Schuh and B. Carson. 1984. Steep
slope harvesting with the Kaiser X5M spyder feller-buncher. IN:
(P. Fox and L. Craig, ed.)
Proceedings Pacific
Schiess P., B. Carson and D. Schuh. 1984.
An evaluation of the A-line tree swather. Final Report.
Schiess, P.
l984. Cultural treatment of
selected species for woody biomass fuel production in the
Schiess, P. and B. Carson.
1984. Evaluation of six short
rotation harvesting systems. Final
Report.
Schiess,
P. and K. Yonaka. 1983. Evaluation of industrial baling technique for
forest residue. Final Report, June 1983.
Schiess, P. and N.
Heuman. 1983. Changes in soil properties following the
operation of the Kaiser X5M feller buncher.
Final Report, PNW-82-203.
Cole, D.W., C. L. Henry, P. Schiess and R. J. Zasoski. 1983.
The role of forests in sludge and wastewater utilization programs. In: (A. L.
Page, T. L. Gleason III, J. E. Smith, Jr.,
Schiess, P. and K.
Yonaka. l983. Baling--A new concept in residue
handling. p. 2l4-240. IN: (D. L. Lynch, ed.) Proceedings, Timber Harvesting in the
Schiess, P., D. Schuh, E.
Miyata and C. Mann. l983. Concept evaluation of a walking
feller-buncher--The Kaiser X5M Spyder.
p. l66-2l2. IN: (D. L. Lynch, ed.) Proceedings Timber Harvesting in the
Schiess,
P. and W. Stuart. l983. Baling of whole trees and/or residueas an
alternative to in-woods chipping and/or residue treatment. Final Report, PNW-81-187.
Schiess, P. l982.
Comparison of various stump-pulling techniques. Paper No. PNR-82-50l, Amer. Soc. Agric.
Eng. Sept. 82,
Schiess, P. and K.
Yonaka. l982. Baling process--new concepts of wood
transport. Paper No. PNR-82-502, Amer.
Soc. Agric. Eng., Sept. 82,
Schiess, P. and R.
Martin. l982. Mechanized harvesting on steep slopes. IN: (E. Aulerich, ed.) Proceedings, 5th
National Symposium, Council on Forest Engineering, August, l982.
Schiess, P. l982.
Cultural treatment of selected species for woody biomass fuel production
in the
Schiess, P. l982.
Harvesting Equipment and Cost Analysis for plantations. Technical Report.
Schiess, P. l982.
Evaluation of the whole tree baler and its potential for use in biomass
plantations in the
Schiess,
P. and K. Yonaka. l982. Evaluation of new concepts in biomass fiber
transport. IN: (Sarkanen and Tillman,
ed.) Progress in Biomass Conversion, Vol. III.
Academic Press, N.Y.
Schiess,
P. and D. W. Cole. l98l. Renovation of wastewater by forest
stands. IN: (Bledsoe, ed.) Municipal Sewage Waste
Application to Pacific Northwest Forest Lands.
Inst. For. Res. No. 4l.
Cole,
D. W. and P. Schiess. l978. Renovation of wastewater and response of
forest ecosystems. The
Breuer,
D. W., D. W. Cole and P. Schiess.
l977. Nitrogen transformation and
leaching associated with wastewater irrigation in Douglas-fir, poplar, grass,
and unvegetated systems. In: (W. E.
Sopper ed.) Municipal Wastewater and Sludge Recycling on
Cole, D. W. and P. Schiess. l976. A study of the interaction of wastewater with forested ecosystems. Technical Report - Contract DACW73- 73-C-0076.
Schiess, P.
l975. The energy balance of
dewatered sludge. Ph.D. Thesis,
Fritschen, L. J., C. H.
Driver, C. A. Avery, J. M. Buffo, R. Kinerson and P. Schiess. l970.
Dispersion of air tracers into and within a forested area. Volume 3.
Research and Development Technical Report Grant DA-AMC-28-043-68-G8, of
Washington - U. S. Army Electronics Command, Atmo- spheric Sciences Laboratory,
For Huachuca, Arizona. 53 p.
Fritschen, L. J., C. H.
Driver, C. A. Avery, J. M. Buffo, R. Kinerson
and P. Schiess. l970. Dispersion of air tracers into and within a forested
area. Volume 2. Research and Development Technical Report
Grant DA-AMC-28-043-68-G8,