|
bc2.f.html |
 |
|
Source file: bc2.f
|
|
Directory: /home/rjl/git/rjleveque/clawpack-4.x/clawpack/2d/lib
|
|
Converted: Sun May 15 2011 at 19:15:43
using clawcode2html
|
|
This documentation file will
not reflect any later changes in the source file.
|
c
c
c =====================================================
subroutine bc2(maxmx,maxmy,meqn,mbc,mx,my,xlower,ylower,
& dx,dy,q,maux,aux,t,dt,mthbc)
c =====================================================
c
c # Standard boundary condition choices for claw2
c
c # At each boundary k = 1 (left), 2 (right), 3 (top), 4 (bottom):
c # mthbc(k) = 0 for user-supplied BC's (must be inserted!)
c # = 1 for zero-order extrapolation
c # = 2 for periodic boundary coniditions
c # = 3 for solid walls, assuming this can be implemented
c # by reflecting the data about the boundary and then
c # negating the 2'nd (for k=1,2) or 3'rd (for k=3,4)
c # component of q.
c ------------------------------------------------
c
c # Extend the data from the interior cells (1:mx, 1:my)
c # to the ghost cells outside the region:
c # (i, 1-jbc) for jbc = 1,mbc, i = 1-mbc, mx+mbc
c # (i, my+jbc) for jbc = 1,mbc, i = 1-mbc, mx+mbc
c # (1-ibc, j) for ibc = 1,mbc, j = 1-mbc, my+mbc
c # (mx+ibc, j) for ibc = 1,mbc, j = 1-mbc, my+mbc
c
implicit double precision (a-h,o-z)
dimension q(1-mbc:maxmx+mbc, 1-mbc:maxmy+mbc, meqn)
dimension aux(1-mbc:maxmx+mbc, 1-mbc:maxmy+mbc, *)
dimension mthbc(4)
c
c
c-------------------------------------------------------
c # left boundary:
c-------------------------------------------------------
go to (100,110,120,130) mthbc(1)+1
c
100 continue
c # user-specified boundary conditions go here in place of error output
write(6,*) '*** ERROR *** mthbc(1)=0 and no BCs specified in bc2'
stop
go to 199
c
110 continue
c # zero-order extrapolation:
do 115 m=1,meqn
do 115 ibc=1,mbc
do 115 j = 1-mbc, my+mbc
q(1-ibc,j,m) = q(1,j,m)
115 continue
go to 199
120 continue
c # periodic:
do 125 m=1,meqn
do 125 ibc=1,mbc
do 125 j = 1-mbc, my+mbc
q(1-ibc,j,m) = q(mx+1-ibc,j,m)
125 continue
go to 199
130 continue
c # solid wall (assumes 2'nd component is velocity or momentum in x):
do 135 m=1,meqn
do 135 ibc=1,mbc
do 135 j = 1-mbc, my+mbc
q(1-ibc,j,m) = q(ibc,j,m)
135 continue
c # negate the normal velocity:
do 136 ibc=1,mbc
do 136 j = 1-mbc, my+mbc
q(1-ibc,j,2) = -q(ibc,j,2)
136 continue
go to 199
199 continue
c
c-------------------------------------------------------
c # right boundary:
c-------------------------------------------------------
go to (200,210,220,230) mthbc(2)+1
c
200 continue
c # user-specified boundary conditions go here in place of error output
write(6,*) '*** ERROR *** mthbc(2)=0 and no BCs specified in bc2'
stop
go to 299
210 continue
c # zero-order extrapolation:
do 215 m=1,meqn
do 215 ibc=1,mbc
do 215 j = 1-mbc, my+mbc
q(mx+ibc,j,m) = q(mx,j,m)
215 continue
go to 299
220 continue
c # periodic:
do 225 m=1,meqn
do 225 ibc=1,mbc
do 225 j = 1-mbc, my+mbc
q(mx+ibc,j,m) = q(ibc,j,m)
225 continue
go to 299
230 continue
c # solid wall (assumes 2'nd component is velocity or momentum in x):
do 235 m=1,meqn
do 235 ibc=1,mbc
do 235 j = 1-mbc, my+mbc
q(mx+ibc,j,m) = q(mx+1-ibc,j,m)
235 continue
c # negate the normal velocity:
do 236 ibc=1,mbc
do 236 j = 1-mbc, my+mbc
q(mx+ibc,j,2) = -q(mx+1-ibc,j,2)
236 continue
go to 299
299 continue
c
c-------------------------------------------------------
c # bottom boundary:
c-------------------------------------------------------
go to (300,310,320,330) mthbc(3)+1
c
300 continue
c # user-specified boundary conditions go here in place of error output
write(6,*) '*** ERROR *** mthbc(3)=0 and no BCs specified in bc2'
stop
go to 399
c
310 continue
c # zero-order extrapolation:
do 315 m=1,meqn
do 315 jbc=1,mbc
do 315 i = 1-mbc, mx+mbc
q(i,1-jbc,m) = q(i,1,m)
315 continue
go to 399
320 continue
c # periodic:
do 325 m=1,meqn
do 325 jbc=1,mbc
do 325 i = 1-mbc, mx+mbc
q(i,1-jbc,m) = q(i,my+1-jbc,m)
325 continue
go to 399
330 continue
c # solid wall (assumes 3'rd component is velocity or momentum in y):
do 335 m=1,meqn
do 335 jbc=1,mbc
do 335 i = 1-mbc, mx+mbc
q(i,1-jbc,m) = q(i,jbc,m)
335 continue
c # negate the normal velocity:
do 336 jbc=1,mbc
do 336 i = 1-mbc, mx+mbc
q(i,1-jbc,3) = -q(i,jbc,3)
336 continue
go to 399
399 continue
c
c-------------------------------------------------------
c # top boundary:
c-------------------------------------------------------
go to (400,410,420,430) mthbc(4)+1
c
400 continue
c # user-specified boundary conditions go here in place of error output
write(6,*) '*** ERROR *** mthbc(4)=0 and no BCs specified in bc2'
stop
go to 499
410 continue
c # zero-order extrapolation:
do 415 m=1,meqn
do 415 jbc=1,mbc
do 415 i = 1-mbc, mx+mbc
q(i,my+jbc,m) = q(i,my,m)
415 continue
go to 499
420 continue
c # periodic:
do 425 m=1,meqn
do 425 jbc=1,mbc
do 425 i = 1-mbc, mx+mbc
q(i,my+jbc,m) = q(i,jbc,m)
425 continue
go to 499
430 continue
c # solid wall (assumes 3'rd component is velocity or momentum in y):
do 435 m=1,meqn
do 435 jbc=1,mbc
do 435 i = 1-mbc, mx+mbc
q(i,my+jbc,m) = q(i,my+1-jbc,m)
435 continue
c # negate the normal velocity:
do 436 jbc=1,mbc
do 436 i = 1-mbc, mx+mbc
q(i,my+jbc,3) = -q(i,my+1-jbc,3)
436 continue
go to 499
499 continue
return
end